DEFY Extreme Composite Deck Sealer (DEFY Composite Deck Sealer) is an extremely durable clear finish that helps to prevent the return of black stains on composite decks and protect against the damaging effects of water, fungi, and UV radiation on composite wood surfaces. This V.O.C.-compliant, water-based product is fortified with zinc nano-particles, a natural deterrent to recurring black algae stains. There are over 30 TRILLION of these zinc nano-particles per square inch that protect your composite wood from the sun’s harmful UV rays, protecting your composite deck from color fade, moisture, and fungal growth.
DEFY Extreme Composite Deck Sealer contains zinc nano-particles that reflect the damaging ultraviolet rays from the sun. When you reduce the size of these zinc particles down to the nano level, they become invisible to the naked eye. These nano-particles are distributed at a rate of over 30 trillion per square inch of surface area to provide protection from the sun, much like in sun blockers and sunscreen lotions. This will not only help to prolong the graying, but, as the nano-particles are highly resistant to mold and mildew, will enable you to retain the natural color.
DEFY Extreme Composite Deck Sealer is available in a crystal clear finish and is designed to be used on exterior wood surfaces including:
- composite decks
- all natural wood surfaces
Before using DEFY Extreme Composite Deck Sealer, clean the deck with DEFY Composite Deck Cleaner. This will generally clean and restore previously treated surfaces to their original appearance. The surface should be recoated when graying initially starts to appear.
- Coverage Rate: Approx. 200-300 sq. ft. per coat. (For 2 coats 100-150 sq. ft.)
- Available Sizes: 1 gal. containers
- Application Temperatures: Minimum 45° F
- Application Method: Pump sprayer, airless sprayer, pad applicator or brush
- Dry Time: 2-4 hours (above 45° F), allow 24 hours before using
- Cleanup: Soap and water
Warning: This product can expose you to Ethylene oxide, which is known to the State of California to cause birth defects or other reproductive harm, and Cumene, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
DEFY Extreme Composite Deck Sealer is an extremely durable clear finish that helps prevent the return of black stains on composite decks as well as protect against the damaging effects of water and UV radiation on composite wood surfaces. This water-based product is fortified with zinc nano-particles, a natural deterrent to recurring black stains. It protects your wood by blocking out the sun's harmful UV rays, helping protect your composite deck from fading, graying, and color loss.
LIMITATIONS: This product is not designed for use on new, composite lumber. New, composite lumber does not typically need to be sealed and is not porous enough to accept this type of product. Over time, as the surface begins to weather and starts to absorb water, it can be sealed with this product. To ensure proper absorbancy, do a water test per label instructions below.
STRIP: Do not use DEFY Extreme Composite Deck Sealer over painted or varnished surfaces. These surfaces must be stripped prior to application of the product.
CLEAN: Composite wood surface must be clean, porous, and dry before applying DEFY Extreme Composite Deck Sealer. Use DEFY Composite Deck Cleaner to remove mildew stains, graying & other foreign matter that might block surface pores and interfere with product penetration. Rinse thoroughly with garden hose or power washer (maximum 1200 p.s.i.).
WEATHER CONDITIONS: Surface and air temperatures should be between 45°F and 95°F. Avoid application in direct sunlight. Although surface may be slightly damp, do not apply to wet or water saturated surfaces, or when rain is expected within 12 hours.
WATER TEST: After allowing the surface to thoroughly dry from cleaning, sprinkle a few drops of water on the surface. It should begin to penetrate within a few seconds. If it doesn't, then don't apply the finish. The composite lumber is either not dry enough or not porous enough to accept the finish correctly. Test a small area before starting general application to assure desired results.
MIX WELL: Shake or stir contents before and periodically during use. Do not thin product.
PROTECT ADJACENT AREAS: Use plastic, cardboard, and/or drop cloths to protect all adjacent non-targeted surfaces such as siding, windows, masonry, plant life, etc. from overspray and runoff. Immediately remove overspray from non-targeted areas with soap and water. Overspray that is allowed to dry will be difficult to remove; dried product cannot be removed from concrete and masonry.
USE THE RIGHT EQUIPMENT: Hand brushes should be high quality nylon or polyester. A pad applicator or deck brush may also be used. For large areas, a pump-up or airless sprayer may be used. If using an airless sprayer, use tips between .011 and .015, and use the lowest pressure that achieves a uniform spray pattern to minimize fogging and overspray. When spraying, always back brush to ensure a uniform application, and to break the surface tension of the composite material so the stain will penetrate deeper and last longer.
DECKS: DEFY Extreme Composite Deck Sealer can be applied to all natural and composite wood surfaces. Start by applying DEFY Extreme Composite Deck Sealer to the railings, benches, and undersides of upper level decks (only one coat is required on undersides). Once underside is treated, immediately brush out all overspray, drips, etc. Treat horizontal surfaces last. When treating horizontal composite deck surfaces, only a single coat of material is required. For natural wood surfaces, apply two coats of sealer, waiting approximately 10-20 minutes between coats. Brush product into surface working out all drips, puddles, or areas of overspray before product dries. Do not over apply finish. To avoid the possibility of peeling, apply only as much finish as the deck can easily absorb. A sure indication of over application is a shiny appearance. Complete entire sections or to a natural break before allowing to dry. Never break in the middle of a board. Thoroughly coat the ends of boards to prevent water penetration.
VERTICAL SURFACES: Start from the bottom and work up. Treat the entire length of a board before moving up. If necessary, brush or feather in to avoid lap marks. Brush in product before it dries and work out drips, runs, or overspray.
DRY TIME: To touch, 2 to 6 hours depending on temperature and humidity. Allow 24 hours for deck to completely cure before using.
CLEAN-UP: Clean tools and equipment immediately after each use with soap and water.
COVERAGE: One gallon of DEFY Extreme Composite Deck Sealer will cover approximately 200 - 300 sq. ft. per coat, depending on wood texture and porosity.
May cause an allergic skin reaction. Keep out of reach of children. Avoid breathing fumes, dust, mist, spray, vapor. Wear eye protection, protective clothing, and protective gloves. Dispose of contents/container to comply with applicable local, national and international regulation.
IF INHALED: Move the affected person away from the contaminated area and into the fresh air. If symptoms persist, seek medical advice. SKIN CONTACT: Wash off immediately with soap and plenty of water. Obtain medical attention if irritation persists. EYE CONTACT: Immediately flush eyes thoroughly with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Seek medical attention if irritation persists. INGESTION: If swallowed, rinse mouth with water (only if the person is conscious). Do NOT induce vomiting unless directed to do so by a physician. If the person is fully conscious, make him/her drink water. Never give an unconscious person anything to drink. Immediately call a POISON CENTER or doctor/physician. For additional information for this product, consult the Product Data Sheet or Safety Data Sheet available at defywoodstain.com.
KEEP FROM FREEZING
VOC CONTENT < 250 g/L
- DEFY not only stains the wood, but it also seals it against water penetration
- DEFY stains can be applied to visibly dry wood or wood that is slightly damp. This makes it possible to clean, brighten and stain all in one day.
- DEFY stains are penetrating stains that soak into the wood pores to form a strong, long-lasting bond.
- No messy solvents needed! Clean-up is easy with just soap and water.
- DEFY offers clear, semi-transparent, and solid stains in a variety of colors that not only protect but beautify your wood.
- DEFY stains are available in flat, natural-looking finishes as well as finishes with a satin sheen (DEFY Ultra).
- DEFY stains are formulated with the latest technology, combined with high-quality ingredients that create a lasting finish that is not prone to peeling, premature fading, or graying.
- DEFY stains offer weather protection from the sun, rain, and snow.
DEFY stands behind the integrity of our products. If you are not satisfied with the performance of this product, and provide that you have followed label instructions, return the unused portion with a proof of purchase for refund or replacement of product.
This guarantee does not include the cost of labor for removal or application of the product.
CLEANING & PREPARATION
The answer varies based on the current condition of your wood. If you do decide to pressure wash your deck, use pressure between 1,000 or 1,200 psi. Also be sure to work with the grain and never against it, as it will cause damage to the wood's surface and splinters.
If you don't have easy access to a pressure washer or have to pay to rent one, we recommend DEFY Wood Cleaner instead. It's easy to use and will clean deep into the wood, which makes your next coat of wood stain more effective and more beautiful.
If you are using an oil-based stain, definitely. You can use DEFY stains, which are water-based products, even when the surface is slightly damp.
With oil based stains, wood must be bone-dry before you can begin staining. However, DEFY stains are water-based, so you can use them even when the surface is slightly damp.
If your wood is in constant shade and moisture is present often, you might never be able to prevent mold and mildew completely. However, you can improve your chances by keeping your deck cleaned and sealed with professional grade stains like DEFY Extreme, DEFY Ultra, and DEFY Solid stains. All 3 of these DEFY stain products contain zinc nano-particles to resist mold/mildew growth. Zinc is naturally resistant to mold & mildew.
Use a diluted bleach solution to clean it off. Mix DEFY Wood Cleaner with water (five parts water to one part cleaner), spray it on, let it set for five or ten minutes, and rinse it off. To prevent it from coming back, stain your deck with DEFY Ultra, Solid, or Extreme Wood Stain for the ultimate mold and mildew protection.
TOOLS & APPLICATION
The best tool for the job varies by the type of job. For decks, the quickest and easiest method to apply DEFY deck stain is with a "car wash" brush. Some have handles and some are handheld and they can be found in most home improvement stores.
You can, but we don't recommend it. Paint rollers were designed for thick paint, not water-based wood stains. Using a roller will often simply push the stain around on the surface and not force it into the pores. It can also leave a stipple effect in the finish when the stain has dried.
When using a semi-transparent DEFY stain (Essential, Extreme or Ultra), only apply as much stain as the wood can absorb easily. If any puddles form during your staining process, be sure to brush them out to disperse the puddle.
DEFY Essential and Extreme stains have a flat finish, so if a gloss has formed on the surface the stain has been over-applied. Over time, it will be likely to peel. Even after two coats, your deck should still have a flat finish.
With DEFY Ultra stains, two coats will result in a satin finish. One coat will appear flat. A glossy appearance, would still indicate an over-application.
This can vary slightly based on where you live, but typically the Spring and Fall offer the easiest conditions to work in. Below 80° is ideal and regardless of the season, it's best to stay out of direct sunlight because it can cause the stain to dry too quickly.
CARE & MAINTENANCE
We know it's easier NOT to stain your deck, but we've designed DEFY wood stains to be the next easiest thing! Leaving your deck untreated, means you'll be building a new deck in a few years and that's much more expensive than protecting the one you've already got.
Your home's outdoor spaces are extension of your life and they deserve both beauty and protection. DEFY wood stains will help protect your investment from UV rays, stains from mold and mildew, and moisture. Restore and extend the life of your deck with DEFY.
That’s easy! Clean your deck with DEFY Wood Brightener, which will give it a boost in appearance. You can also apply one, light coat of new stain once you've brightened.
Yes, DEFY Composite Deck Sealer works well on most composite wood surfaces. Just follow all of the directions in the same way that you would if you were staining regular wood and you'll love the results!
CLEAN or STRIP
If your wood that is weathered, dirty, graying, or already has a worn out stain on it, use DEFY Wood Cleaner. If there is existing, weathered stain that is still holding up, use DEFY Stain Stripper instead. These products help prepare your wood to receive the maximum amount of new stain and give the entire surface a consistent color.
Once the wood has been cleaned or stripped, use DEFY Wood Brightener to neutralize and brighten the surface.
It also opens the wood pores, so that they can receive the maximum amount of stain.
DEFY offers a variety of stains designed specifically for exterior wood, marine wood and composite wood. Choose your preferred stain color and transparency, then apply one or two coats to protect the natural appearance of your wood.
We Can Help
Not Sure If This Stain Is RIGHT FOR YOU?
Wondering which DEFY products it takes to
complete your project?
Answer just a few questions
(it takes less than a minute) and we can tell you exactly what you need to get the job done.