DEFY
DEFY Solid Color Wood Stain
DEFY Solid Color Wood Stain is an acrylic, opaque wood finish built for long-lasting weather protection on exterior wood surfaces. Fortified with zinc nanoparticles that work like sunscreen for your wood, this solid wood stain blocks harmful UV rays and resists mildew stains caused by mold. The matte finish hides imperfections in the wood grain while giving wood decks, fence boards, wood siding, and outdoor furniture a clean, uniform look. Available in seven pre-mixed colors including Light Walnut, Dark Walnut, and Barn Red.
-
Cleans Composite & Vinyl Decking
-
Safer Than Chlorine Bleach
-
Cleans Vinyl & Aluminum Siding
-
Easy to Use – Simply Dilute in 5 Gallons Warm Water
-
Safe for Plans & Vegetation
Note: Actual color may vary from on-screen representation.
Warning: This product can expose you to Benzophenone, which is known to the State of California to cause cancer, and Methanol, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
How to Apply DEFY Solid Color Wood Stain
Weather Conditions: Surface and air temperature should be between 45°F and 95°F. Avoid application in direct sunlight. Do not apply to wet surfaces or when rain is expected within 12 hours.
Mix Well: Shake or stir before and during use. Mix at least one-third of product from a used container with a new one for uniform color. Do not thin.
Protect Adjacent Areas: Cover nearby non-targeted surfaces (i.e. windows, masonry, plant life) from overspray. Remove overspray immediately with soap and water.
Use the Right Equipment: Use a high-quality nylon or polyester brush. A paint roller or airless sprayer may also be used.
Apply: Most applications require two coats. Allow the first coat to dry before applying the second coat.
Drying Time: Dry to touch in 1-2 hours depending on weather conditions. Allow 24 hours for your deck to cure. Humidity and cooler temperatures can increase dry time.
Clean-Up: Clean tools and equipment immediately with soap and water.
Coverage: Approximately 200-300 sq. ft. per gallon per coat.
DEFY Solid Color Wood Stain is a durable acrylic, opaque wood finish that protects against the damaging effects of the elements, on all wood surfaces. This water-based product provides a beautiful matte finish, fortified with transparent zinc nanoparticles. These zinc nanoparticles are like sunscreen for your wood. They provide extreme protection by blocking out the sun's harmful UV rays, as well as resisting stains caused by mold & mildew. DEFY Solid Color Wood Stain can be used all wood types including pressure treated lumber, pine, cedar, redwood, mahogany, Ipe and all other natural wood surfaces. Product can be used on interior, exterior, horizontal, and vertical wood surfaces including decks, fences, wood siding, log homes, and outdoor wood furniture.
SURFACE PREPARATION
Allow new wood to weather for 3 to 6 months to adequately dry out prior to application. Kiln dried lumber can be stained immediately.
CLEAN: All wood surfaces must be clean, porous, and visibly dry before applying DEFY Solid Color Wood Stain. For best results, use DEFY Wood Cleaner to remove dirt, mill glaze, mold or mildew stains, graying and other foreign matter that might block surface pores and interfere with product penetration. Rinse thoroughly using a garden hose or pressure washer.
BRIGHTEN: While surface is still wet from cleaning or stripping, use DEFY Wood Brightener to neutralize the wood, restore the wood to its natural color, and open the pores of the wood, allowing the stain to be more easily absorbed.
APPLICATION
WEATHER CONDITIONS: Surface and air temperatures should be between 45°F and 95°F. Avoid application in direct sunlight. Do not apply to wet or water saturated surfaces, or when rain is expected within 12 hours. Stain may be applied to wood surfaces the same day as cleaning and brightening as long as surface is visibly dry before staining.
MIX WELL: Shake or stir contents before and periodically during use. To ensure absolute color uniformity from container to container, mix at least one third of the product from a used container with the contents of a new one. Do not thin product.
PROTECT ADJACENT AREAS: Use plastic, cardboard, and/or drop cloths to protect all adjacent non-targeted surfaces such as siding, windows, masonry, plant life, etc. from overspray and runoff. Immediately remove overspray from non-targeted areas with soap and water. Overspray that is allowed to dry will be difficult to remove.
USE THE RIGHT EQUIPMENT: Hand brushes should be high quality nylon or polyester. A paint roller may also be used. If using an airless sprayer, use tips between .013 and .015, and use the lowest pressure that achieves a uniform spray pattern to minimize fogging and overspray when spraying. To insure a uniform finish, it is always best to back brush when spraying.
APPLY: Most applications require 2 coats of product be applied, waiting for the first coat to dry before applying the second.
DRY TIME: To touch, one to two hours depending on temperature and humidity. Allow 24 hours for deck to completely cure before using. High humidity and lower temperatures can greatly increase dry time.
CLEAN-UP: Clean tools and equipment immediately after each use with soap and water.
COVERAGE: One gallon will cover approximately 200-300 sq. ft. per coat, depending on wood texture and porosity.
PRECAUTIONS
Keep out of reach of children. Avoid contact with eyes, skin, and clothing. Wash hands and exposed skin after use.
FIRST AID
IF INHALED: Remove to fresh air. Get medical attention if symptoms persist. SKIN CONTACT: Wash with soap and water. Get medical attention if irritation develops and persists. EYE CONTACT:Flush with water for several minutes. Get medical attention if irritation persists. IF SWALLOWED: DO NOT induce vomiting. Rinse mouth with water. Get medical attention if symptoms develop. For additional information for this product, consult the Product Data Sheet.
KEEP FROM FREEZING
VOC CONTENT < 250 g/L
SIMPLE
- DEFY not only stains the wood, but it also seals it against water penetration
- DEFY stains can be applied to visibly dry wood or wood that is slightly damp. This makes it possible to clean, brighten and stain all in one day.
- DEFY stains are penetrating stains that soak into the wood pores to form a strong, long-lasting bond.
- No messy solvents needed! Clean-up is easy with just soap and water.
BEAUTIFUL
- DEFY offers clear, semi-transparent, and solid stains in a variety of colors that not only protect but beautify your wood.
- DEFY stains are available in flat, natural-looking finishes as well as finishes with a satin sheen (DEFY Ultra).
DURABLE
- DEFY stains are formulated with the latest technology, combined with high-quality ingredients that create a lasting finish that is not prone to peeling, premature fading, or graying.
- DEFY stains offer weather protection from the sun, rain, and snow.
DEFY stands behind the integrity of our products. If you are not satisfied with the performance of this product, and provide that you have followed label instructions, return the unused portion with a proof of purchase for refund or replacement of product.
This guarantee does not include the cost of labor for removal or application of the product.
FAQs
When you've been making wood stain products as long as we have, you get used to answering similar questions. So we've gathered some of our most frequently asked questions for you here.
If you can't find the answer you're looking for below, we have more FAQ's here. Our blog is also has helpful resources and videos designed to help homeowners with every type of wood stain project.
CLEANING & PREPARATION
You can pressure wash at 1,000-1,200 PSI, working with the wood fibers to avoid damage. For a deeper clean, DEFY Wood Cleaner removes dirt and mildew stains from exterior wood so your next coat of stain absorbs evenly.
No. DEFY stains are water-based, so you can apply to a wood surface that is slightly damp. The surface should be visibly dry, but not bone-dry like oil-based products require.
Allow new wood to weather for 3-6 months. Kiln-dried lumber can be stained right away. Before applying exterior stain, clean with DEFY Wood Cleaner and follow with DEFY Wood Brightener to open the pores and restore the natural color.
Use a diluted bleach solution to clean it off. Mix DEFY Wood Cleaner with water (five parts water to one part cleaner), spray it on, let it set for five or ten minutes, and rinse it off. To prevent it from coming back, stain your deck with DEFY Ultra, Solid, or Extreme Wood Stain for the ultimate mold and mildew protection.
TOOLS & APPLICATION
A high-quality nylon or polyester brush works best for solid deck stain. On large flat wood decks, a car-wash style push brush is quickest.
A solid stain provides full coverage that hides the wood grain. A semi-transparent stain lets the grain show through, while a semi-solid stain falls between the two. If your deck or fence has heavy wear or discoloration, a solid color wood stain is usually the best choice.
You can, but back-brushing is recommended. Rollers may leave a stipple texture. For best results, work in small sections and back-brush to avoid lap marks.
DEFY Solid comes in seven pre-mixed colors. For custom colors, DEFY also offers Solid Stain Tint Bases that can be tinted at your local paint store. Contact customer service for details.
This can vary slightly based on where you live, but typically the Spring and Fall offer the easiest conditions to work in. Below 80° is ideal and regardless of the season, it’s best to stay out of direct sunlight because it can cause the stain to dry too quickly.
CARE & MAINTENANCE
DEFY uses transparent zinc nanoparticles that block UV rays from breaking down wood fibers and causing fading. This weather protection helps exterior wood surfaces hold up against direct sunlight, rain, and snow year after year.
Leaving your deck untreated exposes the wood to moisture, harmful UV rays, and mold. Over time, that leads to cracking, warping, and costly replacement. DEFY wood stain is low-maintenance, so you are not reapplying every year.
Clean it with DEFY Wood Cleaner, then brighten with DEFY Wood Brightener. Apply a fresh coat of exterior wood stain. For a new look, try Light Walnut or Dark Walnut.
Yes. This solid stain works on all wood type surfaces including outdoor wood furniture, wood siding, and log homes. It provides the same UV rays resistance on furniture as it does on wood decks and fences.
Our Recommended Steps for Maximum Performance
Better Wood Starts here
RESTORE & PROTECT WITH DEFY
DEFY Project Gallery
We Can Help
Not Sure If This Stain Is RIGHT FOR YOU?
Wondering which DEFY products it takes to
complete your project?
Answer just a few questions
(it takes less than a minute) and we can tell you exactly what you need to get the job done.